Yealink CP920 User Manual page 103

When the first party answers the call, tap the Conf soft key to place a new call.
2.
The active call is placed on hold.
Enter the number of the second party and then tap
3.
When the second party answers the call, tap the Conf soft key again to join all parties in
4.
the conference.
Repeat steps 2 to 4 to join more parties in the established conference call.
5.
Merging Multiple Calls into a Conference Call
You can create a conference among an active call and the call(s) on hold by tapping the Conf
soft key.
To merge multiple calls into a conference:
Tap or
1.
Tap the Conf soft key to merge the calls into a conference call.
2.
Joining an Incoming Call to a Conference
You can create a conference when the phone receives an incoming call during the call(s) or a
conference.
To join an incoming call to a conference:
Tap the Join soft key when the phone receives a new call.
1.
The conference among the original call(s) and the incoming call is set up. If you are in a
conference, the new party will join to the conference.
Creating a Hybrid UC Meeting
You can merge the calls on you IP phone, the PSTN and connected mobile phone into to a
hybrid UC meeting. There are many ways to create a hybrid UC meeting, the following shows
an example.
To create a hybrid UC conference:
Make sure you have connected a mobile phone to your IP phone (refer to
1.
Connecting the Bluetooth-Enabled Mobile
to select an active call.
Using Your Phone with SIP/Cloud Account
, ,
Phone).
or the Send soft key.
Pairing and
93