Yealink CP920 User Manual page 133

Using SCA Feature on the IP Phone
This section provides you with detailed information on using the CP920 IP Conference phone in
a SCA scenario.
You can do the following using CP920 IP Conference phone in a SCA scenario:
Placing calls

Answering calls

Place a call on hold

Retrieving a held call

Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Enter the desired number using the keypad when the phone is idle.
1.
Tap ,
2.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on phone A, do one of the following on phone A:
Tap the Hold soft key. The original call is placed on hold.
1.
Tap the NewCall soft key to enter the dialing screen.
2.
Enter the desired number using the keypad.
3.
Tap ,
4.
Phone A will dial the entered number.
Answering Calls
You can have one call or multiple calls on the shared line. Incoming calls will be distributed
evenly among the available shared line.
To answer a call on the shared line:
When an incoming call arrives on the shared line, the phone A and phone B will ring
simultaneously. You can answer the incoming call on either phone A or phone B but not both.
Do one of the following on phone A or phone B:
- Tap ,
Phone B stops ringing.
Tap ,
-
, or the Send soft key.
, or the Send soft key.
or the Answer soft key on phone A.
or the Answer soft key on phone B.
Using Your Phone with SIP/Cloud Account
123