Editing Device Information
To edit device information via phone user interface:
Activate the Bluetooth mode.
1.
Tap the Edit My Device Information from the Bluetooth field.
2.
Enter the desired name in the Device Name field.
3.
The default device name is "Yealink CP920".
Tap the Save soft key to accept the change or the Back key to cancel.
4.
You should make your IP phone discoverable first, and then the pre-configured Bluetooth
device name will display in scanning list of other device.
Disconnecting the Bluetooth Device
To disconnect your Bluetooth device from your IP phone:
Do one of the following:
1.
- Tap
- Tap Menu->Setting->Basic Settings->Bluetooth ->Paired Bluetooth Device.
Select the connected mobile phone, tap the Disconnected soft key.
2.
Then the IP phone will prompt as following:
.
Using Your Phone with Bluetooth Devices
137