McQuay WSC Operating Manual page 85

Menu Structure
The Micro II control has a 2 level menu structure. There are eight main menus that contain
parameters related to the different functions of the starter and five of the main menus contain
additional sub-menus that divide the parameters into functional groups. The following shows the
structure of the menu structure.
Table 39, Main Menu
Quick Start
Changing a Parameter
To change a parameter, follow these steps;
• View the desired parameter by following the "Viewing a Parameter" instructions.
• Press the Enter button to switch to the change parameter screen.
• Press the Up or Down buttons to get the desired value on the screen.
• Press the Enter button to store the new value.
Example
The ramp time is set to 30 seconds and it is to be changed to 20 seconds.
The following steps must be taken to change the ramp time.
• Press the Menu button to enter the menu system.
• Press the Down button twice to get to the Starter Setup screen.
• Press the Enter button to access the Starter Setup menu.
• Press the Down button once to display the Forward1 Profile.
• Press the Enter button to access the Forward1 Profile sub-menu.
• Press the Down button twice to display the Ramp Time parameter.
• Press the Enter button to allow a change to the ramp time.
• Press the Down button repeatedly to change the Ramp Time to the desired value.
• Press the Enter button to store the value.
• Press the Menu button repeatedly to return to the main display.
OM Centrif Micro ΙΙ-5
Motor
Nameplate
True Torque Ramp
Event Recorder Control Config
System Clock
System Password
Comm. Settings
Options List
Software Part#
Starter Setup Motor Protection
Starter Modes Overload Class
Forward1 Profile Line Current
Forward2 Profile Line Voltage
Tachometer Setup Line Frequency
Decel Setup Ground Fault
Port Ctl Setup Shorted Scr
Over Curr. Trip
Under Curr. Trip
Start Lockouts
Starting Timers
Permissive Input
Fault Classes
Continued
Factory Setup
Hardware Setup
Bist Setup/Run
Factory Control
Meters &
Relays
Meters Setup
Standard
Relays
Extended
Relays
Misc.
RTD Setup
Rtd Module Setup
Rtd Setpnts 1-8
RTD Setpnts 9-16
85