Display; Readings And Their Meaning - Samson TROVIS 5724-8 Mounting And Operating Instructions

Operation

6.2 Display

The actual value (process variable) before
the comparator for controller [1] or [2] is
shown on the display during closed-loop op-
eration. The setting is performed in the A3.1
configuration item in TROVIS-VIEW (see An-
nex A).
6.2.1 Readings and their
meaning
Non-blinking readings on the display
Displayed value (see A.2.2 in Annex A)
< –9 °C
Displayed value (see A.2.2 in Annex A)
> +99 °C
Zero calibration active
Initialization in progress
Transit time measurement in progress
Blocking protection active
Manual level in TROVIS-VIEW active
Long-term test active
Internal limit LIM1 reached
Internal limit LIM2 reached
Program controller active
Manual level active
Initialization in progress
Update in progress
6-2
Î Error messages (see the 'Malfunctions'
section).
Information indicated by the decimal point
on the bottom right-hand corner of the dis-
play
− Programmed function of [I] key activated
by digital input.
On
Off
− Programmed function of [O] key activat-
ed by digital input.
On
Off
− Programmed function of [I] key activated
by on-site operation.
On
1 s
Off
− Programmed function of [O] key activat-
ed by on-site operation.
On
1 s
Off
− Program (program controller) active.
On
1 s
Off
Time
Time
1 s
Time
1 s 1 s
Time
1 s
Time
EB 5724-8 EN