Mitsubishi Electric MR-JE-_A Instruction Manual page 349

APPENDIX
App. 2.6 Transportation and storage
CAUTION
When you keep or use it, please fulfill the following environment.
Item
Operation
Ambient
Transportation (Note)
temperature
Storage (Note)
Ambient Operation, transportation,
humidity storage
Test condition
Vibration
resistance
Operation
Transportation (Note)
Storage
Pollution degree
IP rating
Operation, storage
Altitude
Transportation
Note. In regular transport packaging
Transport the products correctly according to their mass.
Stacking in excess of the limited number of product packages is not allowed.
For detailed information on the battery's transportation and handing refer to app.
1 and app. 2.
Install the product in a load-bearing place of servo amplifier and servo motor in
accordance with instruction manual.
Do not get on or put heavy load on the equipment.
Do not hold the lead of the built-in regenerative resistor, cables, or connectors
when carrying the servo amplifier. Otherwise, it may drop.
[°C]
[°C]
[°C]
57 Hz to 150 Hz with constant acceleration of 9.8 m/s
Environment
0 to 55 Class 3K3 (IEC/EN 60721-3-3)
-20 to 65 Class 2K4 (IEC/EN 60721-3-2)
-20 to 65 Class 1K4 (IEC/EN 60721-3-1)
5 %RH to 90 %RH
10 Hz to 57 Hz with constant amplitude of 0.075 mm
(Test Fc of IEC 60068-2-6)
5.9 m/s
Class 2M3 (IEC/EN 60721-3-2)
Class 1M2 (IEC/EN 60721-3-2)
2
IP20 (IEC/EN 60529)
Open type (UL 50)
Max. 2000 m above sea level
Max. 10000 m above sea level
App. - 10
2 to IEC/EN 61800-5-1
2