Mitsubishi Electric MR-JE-_A Instruction Manual page 208

6. NORMAL GAIN ADJUSTMENT
(d) If an error occurs
Stop symbol
2 s interval
Error code
Pushing the "SET" button will switch to the initial screen.
Initial screen
(e) If an alarm occurs
One-touch tuning in progress
Alarm display
(f) If a warning occurs
One-touch tuning in progress
Alarm display (warning)
If an error occurs during the one-touch tuning, the tuning will be forcibly terminated and the
stop symbol and error code from "C 001" to "C 00F" will be displayed by turns with 2 s
interval.
Check the error cause referring to table 6.2 of (1) (e) in this section.
If an alarm occurs during the one-touch tuning, the tuning will be forcibly terminated and
the alarm No. will be displayed.
If a warning occurs during the one-touch tuning the alarm No. of the warning will be
displayed.
When the warning is one which continue the motor driving, the one-touch tuning will be
continued.
6 - 21