Motorola PMP 320 Hardware Installation page 95
Hide thumbs
Also See for PMP 320:
- User manual (73 pages) ,
- Configuration manuallines (37 pages) ,
- Administration and configuration manual (95 pages)
Table of Contents
Advertisement
PMP 320 Hardware Installation
Procedure 5-6
service connection (Continued)
After finding the strongest signal from the service provider, tighten all the bolts on
5
the mounting bracket assembly. Once the screws are tightened, the CSM will no
longer move sideways, nor up and down.
Log out of the CSM GUI once optimal signal strength is achieved.
6
After completing the alignment and mounting of the CSM on the outside of the building,
proceed with the installation procedures for the subscriber Ethernet, surge suppression, and
unit Earth Grounding procedures.
PMP320HDW2v1
Adjusting the vertical and horizontal tilt of the CSM for level of
Preliminary
Aligning the CSM for best signal strength
5-11
JUL 2010
Advertisement
Table of Contents
