Attach The Ap Assembly To A Pole; Information - Motorola PMP 320 Hardware Installation

Attach the AP assembly to a pole

Attach the AP assembly to a pole
WARNING
The network planner should provide the antenna pattern information for the installation. The
network is planned from true north 0 degrees. Use a compass to ensure there is no overlap of
the antennas as they are installed.
Figure 2-4
Communications Bldg
BT-0781S-XXX
Network
Switch or
Router
AC Power
SGPN4076
2-16
Maintain a safe distance from RF exposure when mounting the AP on the tower 50 cm
(20 inches). Maintain a safe distance from power lines.
Mounting the AP to the tower
Cable Tray
CMM4
600SSD
200SSB
Preliminary
Chapter 2: AP Hardware Installation
BT-0781S-XXX
Drip Loop
Tower Ground
Earth Ground
AP
AP Grounded
to Tower
with 10AWG wire
Tower
PMP320HDW2v1
JUL 2010