Chapter 6: Connectorized Csm Hardware Installation - Motorola PMP 320 Hardware Installation

Connectorized CSM Hardware Installation
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
This chapter provides the instructions and procedures used to:
•
connect the Connectorized CSM device to a pole or wall
•
pre-power up alignment for level of service connection
•
cable the unit
•
connect the antenna cables to the unit
•
ground the unit
•
add surge suppression
•
post power up connection
•
IP connectivity alignment correction
CAUTION
The orientation of the CSM when installed is important. The face of the CSM with the
Motorola logo must be pointing in the direction of the antenna facing outwards from
right corner of the Connectorized CSM.
PMP320HDW2v1
JUL 2010
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
the building. The Ethernet connector must be oriented so it is on the bottom
Preliminary
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
Chapter
6
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■
■ ■ ■ ■
■
■
■
■
6-1