Motorola PMP 320 Hardware Installation page 114
Hide thumbs
Also See for PMP 320:
- User manual (73 pages) ,
- Configuration manuallines (37 pages) ,
- Administration and configuration manual (95 pages)
Table of Contents
Advertisement
Connecting the Antenna Cables to the Unit
Procedure 6-7
an Diagonal Polarized Antenna
1
2
6-12
Connecting the Antenna Cables to the Connectorized CSM when using
Using a 50 ohm low loss cable with an N-type connector, connect the N-type
connector to the V-polarity connector of the antenna to the CSM N-type
connector. Refer to
Figure 6-5
Using the other 50 ohm cable, connect the N-type connector to the H-polarity
connector of the antenna to the CSM N-type connector.
Preliminary
Chapter 6: Connectorized CSM Hardware Installation
for cable connection location on the CSM.
PMP320HDW2v1
JUL 2010
Advertisement
Table of Contents
