Motorola PMP 320 Hardware Installation page 39

PMP 320 Hardware Installation
Procedure 2-1
See Detail A
NOTE
6 Connect the radio to the antenna by sliding it into the captive space.
PMP320HDW2v1
Assemble the AP and antenna for pole mounting (Continued)
Spacer (2.24in)
Hex Nut
Use a level (inclinometer) to tilt of the antenna when installing at
the site. The scissor bracket has degree markings from 0 to 15 on
the bracket, but it is recommended for accuracy to use a level.
Radio
2X
M6 Carriage Bolt
Preliminary
Assembling the AP and connecting the antenna
Use Shorter
5/16-8
Detail A
2X M6 Hex Nut
2X M6 Lock Washer
2X M6 Flat Washer
Antenna
5/16-8
Flat Washer
5/16-8 x 3.5in
Hex Pivot Bolt
5/16-8
Split Lock Washer
NOTE: Slide Radio into
captive space of Antenna
First then secure with
mounting hardware
2-9
JUL 2010