Requirements In Potentially Explosive Atmosphere; First Steps - Bartec Agile X IS User Manual

Industry Tablet PC 10.1"
Type 17-A1B*-****/********
6.2

Requirements in potentially explosive atmosphere

6.3

First steps

Subject to technical changes.
05/2017
Agile X IS
Industry tablet PC
In the event of malfunctions or damage to the casing, shut down the Tablet PC
-
and remove it from the potentially explosive atmosphere.
Does not use, replace, or exchange any non-specified components.
-
Protect the Tablet PC against impacts.
-
Do not expose the Tablet PC to any corrosive/aggressive liquids, vapors or mists.
-
Avoid humidity (moisture) effects outside the specifications.
-
Avoid heat effects outside the specified temperature range.
-
Battery
Do not take the rechargeable battery apart.
−
The internal and external rechargeable batteries should only be charged outside
−
potentially explosive atmospheres.
Use the external battery only for the purpose described in this user manual. It is
−
suitable only for the Agile X IS Tablet PC.
Never expose the rechargeable battery to temperatures exceeding +50 °C.
−
Dispose of defective batteries immediately, observing the regulations on disposal
−
of rechargeable batteries in your respective region.
Ensure that the battery is never set on fire, as this can cause it to explode!
−
Never short-circuit the rechargeable battery.
−
Accessories
Only use accessories certified by BARTEC for this purpose.
−
Exception: micro SIM card.
In order to start using the Agile X IS Industry Tablet for the first time:
1. Unpack the tablet PC.
2. Insert the battery/cover module into the battery compartment.
3. Fully charge the internal and external battery (if used, optionally available)
4. Use of Micro SIM/Micro SD Card (optional)
5. Start the Agile X IS
Commissioning
EN 21/43