Operation; Final Inspection; Cleaning - Bartec Agile X IS User Manual

Operation

7. Operation
7.1

Final inspection

7.2

Cleaning

EN 30/43
Industry Tablet PC 10.1"
Type 17-A1B*-****/********
The operator using an electric system in a potentially explosive environment must keep
the accompanying operation equipment in good condition, operate and monitor it
correctly and conduct the requisite services and repairs. Before operation the devices it
must be checked that all components and documents are available.
The following aspects must be checked before putting the device into operation:
Is there any damage to the display, scanner window or enclosure?
–
Are all covers closed as required?
–
Is the battery or the cover module correctly inserted and locked?
–
Does the screen protector (if used) have the requisite certification?
–
Is the USB stick and the microSD card specified for the tablet PC?
–
Have only accessory parts been attached to the device which has been released
–
for use in potentially explosive atmospheres?
We recommend that the devices be cleaned regularly depending on use and also
treated with care to ensure smooth and trouble free operation. Use residue-free
cleaning cloths for cleaning.
WARNING
Improper use can damage the device.
Only clean devices and accessories outside potentially explosive atmospheres.

As a general rule, disconnect the Tablet PC from the power supply.

Ensure that there is no residue stuck to the contacts.

To guarantee your own safety and the operational safety of the device, observe the
precautionary measures carefully.
Agile X IS
Subject to technical changes.
05/2017