Requirements In Potentially Explosive Atmosphere - Bartec Lumen X7 B7-A23.-2 SERIES User Manual

7" Industry Tablet - Lumen X7
Type B7-A23.-2.../........
5.2

Requirements in potentially explosive atmosphere

Subject to technical changes.
03/2016
For the non-Ex area:
USB network adapter for EU, UK, US and AUS
−
USB cable (Type A to micro Type B)
−
Micro USB Host cable (OTG)
−
Micro SD card
−
Screen protector
−
Charging station for Lumen X7 Industry Tablet
−
Battery charging station
−
Vehicle charging docking station
−
Vehicle charging adapter (Input 12 V DC, Output USB Type A)
−
Mobile power station
−
Hand strap
−
Leather case with screen protector ans shoulder strap
−
Lumen X7 Industry Tablet
The Industry Tablet may not be opened.
−
Exceptions are the interface cover at the lower side for the installation of the
SIM/Micro SD card or the connection of the Micro USB cable, headset, and
power (DC).
Do not use, swap or replace and non-specified components.
−
Do not retrofit any components to the internal plugs or slots. One exception is the
−
SIM card and the Micro SD card.
Protect the Industry Tablet from impact!
−
Do not expose the Industry Tablet to caustic/aggressive liquids, vapors, mists!
−
Avoid the impact of moisture outside the specifications.
−
Avoid thermal impact outside the specified temperature range.
−
Use the following data interfaces only outside the potentially explosive atmosphere
−
and exclusively with the devices specified by the manufacturer!
- 1 x 7-pin docking connector (PoGo pin for charging in the docking station)
- 1 x Micro USB Type B (OTG Host, data exchange and charging)
- Interfaces underneath the cover
1 x SIM card
1 x Micro SD card
1 x Micro USB 2.0 Type B (OTG)
1 x Power connection (DC)
1 x Audio combi connection (microphone In/Line Out)
Commissioning
EN 23/61