Commissioning; Requirements - Bartec Agile S Quick Start Manual

Commissioning

5 Commissioning
5.1

Requirements

12/16
Agile S – 10.1" Tablet PC
Type G7-A0B*-****/********
Tablet PC
 The tablet PC may not be opened.
One exception is the cover for the 4G/LTE Module/SIM card for installation.
 Do not use, swap or replace and non-specified components.
Do not retrofit any components to the internal plugs or slots. One exception if the

4G/LTE module, the SIM card and the slot for the microSD card.
Protect the tablet PC from impact!

 Do not expose the tablet PC to caustic/aggressive liquids, vapours, mists!
Avoid the impact of moisture outside the specifications.

Avoid thermal impact outside the specified temperature range.

Battery
 The battery may not be opened.
Only use the battery for the purpose listed in this Quick Start Guide. Is only suitable for

the tablet PC Agile S, Type G7-A0B.-..../.........
There is a danger of burning if used incorrectly. Do not expose the battery to

temperatures of more than +60 °C (+140 °F).
Defective batteries must be disposed of immediately, whereby the provisions on battery

disposal applicable in the respective region must be observed.
The battery may explode if it catches fire!

 Do not short circuit the battery!
Accessories
User accessories exclusively which have been tested by BARTEC for this purpose.

The end user can replace the 4G/LTE modules, SIM card, microSD card, stylus, hand

strap, leather carry case, shoulder strap and screen protector by himself.
Subject to technical changes.
December 2021 / Revision A