Page 1
Relevant for Agile X-IS Status: November 2020 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. BARTEC GmbH Max-Eyth-Straße 16 Fon: +49 7931 597-0 Support: em-support@bartec.com...
Agile X IS FAQ: HotTab About HotTab Utility The description in this manual describe following HotTab version or later. Device: Version: Agile X IS version A40.1.82 For later versions it could be that not all available menus are listed and described. HotTab provides quick access to the tablet’s functions and features, such as turning on/off Wifi, Bluetooth, GPS, programming function key, and changing power management.
In device manager under category system devices If installed version is older than new version then uninstall first before you start installation. 2.1.1 Download of HotTab utility The latest version is available on BARTEC download page. https://automation.bartec.de/tabletpcE.htm 1. Select the device 2. Go to section “Tools”...
Agile X IS FAQ: HotTab 2.1.2 Download of WMMIO driver The latest version is available on BARTEC download page. https://automation.bartec.de/tabletpcE.htm 1. Select the device 2. Go to section “Driver” 3. Download WMMIO driver WMMIO driver 1. First navigate to the driver directory and start the CMD console from there as administrator.
Page 7
Agile X IS FAQ: HotTab 3. Installation will be done automatically. Press “Enter” key after message appears that “drivers installed successfully”. 4. After the installation a new device “WMMIO Driver” will appear in “Device Manager” under section "System devices". Subject to technical changes. Subject to technical changes.
Agile X IS FAQ: HotTab HotTab utility The HotTab utility can be installed with two procedures. By use of setup.exe file. Installation in background 2.3.1 Installation with “Setup” 1. Download HotTab utility. 2. Unzip the package and store it on your device. 3.
Agile X IS FAQ: HotTab 5. Start installation of HotTab utility by using the command “msiexec /package SetupStandard.msi /quiet” and press “Enter”. 6. After a while PowerShell will be ready for use (Hottab application is also installed) No message is displayed after successful installation. If the customer wants to make sure that everything run smoothly, he has to query the variable “ERRORLEVEL”...
Page 10
Agile X IS FAQ: HotTab 4. Start installation of HotTab utility by using the command “msiexec /i "C:\Users\test\Desktop\Hottab_AXIS_A40.1.82\SetupStandard.msi" /quiet” and press “Enter”. The marked path indicates the storage location of the package 5. After a while CMD will be ready for use (Hottab application is also installed) No message is displayed after successful installation.
Agile X IS FAQ: HotTab Interface Assignment All modules what are built in and managed via HotTab are internal connected to COM ports. Following is the interface list and what modules are assigned. COM-Port Module Description COM 1 RS232 I/O 30-pin combo connector on Agile X COM 2 RS232 I/O...