Bartec Agile X Update Manual

Update Guide

Introduction

This guide will describe how to create a bootable USB Flash
Drive to update the Operating System of your BARTEC
tablets.

Notes for installations

(1) Only install Operating Systems which are provided from
BARTEC. Installing an Operating System that is not
designed for a BARTEC device may not work correctly
with them.
(2) Using the Format and Bootlce utility will delete all data
currently on the USB flash drive.
(3) Make sure that PC, Notebook or Tablet (referred to in
the following as the "computer") is running on AC Power
during the preparation process. Do not unplug the AC
Adapter, or any other connected external devices during
the process. Do not restart or turn off the computer
during the process as it may cause permanent damage
to the file system structure of the USB Flash Drive.

Requirements

Computer with a Windows 7/8/10 operating system

USB flash drive (16GB or more)

BootIce utility

Max-Eyth-Straße 16
EN
97980 Bad Mergentheim
GmbH
GERMANY
Create a Bootable Installation USB Flash Drive
for Agile X and Agile X IS
Phone: +49 7931 597-0 info@bartec.de
Fax: +49 7931 597-119 www.bartec.de

Format USB flash drive

Insert the USB-Sticks your Computer.

Start Windows Explorer and select the USB Flash

Drive
Open the drop-down menu with right mouse click on

the USB-Stick
Select the "Format" option in the menu

A new "Format" window with format options will appear.

Choose following:
NTFS "File system"
type RDVD for the "Volume label"
Activate check box for Quick format
Press "Start" button to begin the process

Disclaimer We reserve the right to make technical changes.
Changes, errors and misprints shall not justify
any claim for damages.
1/4