Page 1
Installation instruction - Translation Agile X IS 10.1" Tablet PC Installation of the Windows 10 IoT Enterprise operating system (BARTEC version) General information Notes for installation Installation of the operating system Document-No.: 11-A1B0-7N0002 Status: December 2021 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages.
Notes for installation ..........................3 Requirements ........................3 Installation of the operating system ....................4 Installation with Standard non-Ex USB stick ..............4 Installation with Bartec Ex-i USB stick ................7 Subject to technical changes. Subject to technical changes. 09/2020...
Tablet PC Agile X IS Tablet PC Agile X IS. Quick Start Guide This Quick Start Guide describes the safety- Tablet PC Agile S NI related information, first use and further data of the Tablet PC Agile X IS Subject to technical changes. 12/2021...
BARTEC Build number BARTEC Requirements Requirements for the Agile X IS series to install the operating system: 1. Tablet-PC Agile X IS 2. Docking Station 03-9914-0022 for Tablet PC Agile X IS (recommended) 3. Power supply 03-9911-0040 4. AC power cable 5.
Installation of the operating system This installation of the Windows 10 IoT Enterprise operating system can be process in two ways, depending on the prepared USB stick (standard non-Ex USB stick or Bartec Ex-i USB stick. Note: First you need to prepare a bootable installation USB stick with the required BARTEC operating system image.
Page 7
Installation of the Agile X IS operating system Installation instruction: Windows 10 IoT Enterprise operating system 3. Press the Power button, to boot the Tablet-PC. 4. The Microsoft Deployment Kit starts automatically. Click "Run the Deployment Wizard to install a new Operating System" to start the installation.
Page 8
Agile X IS Installation of the Installation instruction: Windows 10 IoT Enterprise operating system operating system 5. The Installation Progress starts. The installation of the OS needs approx. 10-15 minutes. 6. After the installation has finished, the Tablet-PC turned off automatically.
Installation with Bartec Ex-i USB stick 1. Insert the Tablet-PC in the docking station and connect the power supply. 2. Plug the Bartec Ex-i USB stick with the operating system into the USB port of the Tablet-PC. Subject to technical changes.
Page 10
Agile X IS Installation of the Installation instruction: Windows 10 IoT Enterprise operating system operating system 3. Press the Power button, to boot the Tablet-PC. 4. The Microsoft Deployment Kit starts automatically. Click "Run the Deployment Wizard to install a new Operating System" to start the installation.
Page 11
Installation of the Agile X IS operating system Installation instruction: Windows 10 IoT Enterprise operating system 5. The Installation Progress starts. The installation of the OS needs approx. 10-15 minutes. 6. After the installation has finished, the Tablet-PC turned off automatically.