Equipping Laser Devices; Led Units; Restrictions In The Case Of Wireless Devices - Bartec Agile X IS User Manual

Operation
7.3.8

Equipping laser devices

7.3.9

LED units

7.3.10

Restrictions in the case of wireless devices

Radio modules
Bluetooth®
radio technology
Country-specific roaming
Ad-hoc operation
EN 32/43
Industry Tablet PC 10.1"
Type 17-A1B*-****/********
Laser warning note
Notice no. 50 dated June 24th, 2007 and EN60825-1: 2007 and IEC60825-1 (ed. 2.0).
The laser classification is specified on a sticker attached to the device.
Class 2 laser scanners use a low-power laser diode with visible light. As is the case
with any bright light source, such as the sun, always avoid looking directly into the light
beam. No information is available regarding the potential dangers of being exposed to
class 2 laser light for a brief period.
Caution: The use of control elements which change settings or initiate procedures that
are not mentioned here can lead to a situation in which persons are exposed to
hazardous laser beams.
CAUTION
Laser radiation! May damage eyesight!
Do not look into the laser beam.

Devices supplied by BARTEC with LED light comply with the following directive:
EN 60079-28 for LED safety
−
The use of wireless devices is possibly forbidden or restricted. This applies
primarily on board aircraft, in hospitals, in the vicinity of explosive substances or
under other hazardous conditions. If you are not sure which regulations apply to
the use of the device, ask permission before switching it on.
The device contains radio modules. The identification data for these modules are
provided below:
Radio module from BARTEC which supports WLAN 802.11 a/b/g/n/ac and
−
Bluetooth.
This is an authorized Bluetooth® product. Further information and an end product list is
provided at https://www.bluetooth.org/tpg/listings.cfm.
This device has the International Roaming function (IEEE802.11d) which ensures that
the device is used on the channels prescribed for the respective country.
The ad-hoc operation is restricted to the channels 36–48 (5150–5250 MHz). The use of
this bandwidth is restricted to indoor areas; use outdoors is not permitted.
Agile X IS
Subject to technical changes.
05/2017