Inserting External Battery/Cover Module - Bartec Agile X IS User Manual

Commissioning
6.3.1

Inserting external battery/cover module

EN 22/43
Industry Tablet PC 10.1"
Type 17-A1B*-****/********
The Agile X IS has a built-in battery and is ready for operation after switching on.
WARNING
Dirt on the battery contacts can impair the functionality!
Ensure that no external influences damage the external battery contacts when

replacing the external battery / cover module.
Only insert the replaceable external battery or the cover module.

Work steps
1. Place the Tablet PC with the front side (display facing down) on a flat surface. Be
careful not to scratch the display. The power supply automatically switches from
the external battery to the internal battery.
2. Before using the battery or cover module, make sure that the multi-stage release
latch (a) of the battery compartment is open.
3. Make sure that both lock sliders are locked in the outer position (red markings in
the release latch).
4. Insert the battery/cover module into the battery compartment (b) first.
5. Press the battery/cover module into the clamp position (c).
6. Move the lock sliders to the middle position (d).
7. Press the battery/cover module into the battery compartment (e).
Agile X IS
Subject to technical changes.
05/2017