Page 1
Installation manual Agile S / Agile S NI 10,1" Tablet-PC Create a bootable USB stick with Windows 10 IoT Enterprise LTSC 1809 Introduction formatting the USB stick copy the operating system on the USB stick install the operating system Status: March 2021 Reservation: Technical data subject to change without notice.
Agile S / Agile S NI Table of content Installation manual: bootable USB stick for Windows 10 LTSC 1809 Introduction ............................3 Note for installation ..........................3 Requirements ............................4 Format USB flash drive ........................4 Copy the operating system on the USB stick ..................6 Subject to technical changes.
(1) Only install Operating Systems which are provided from BARTEC. Installing an Operating System that is not designed for a BARTEC device may not work correctly with them. (2) Using the Format and Rufus utility will delete all data currently on the USB flash drive.
Agile S / Agile S NI Installation manual Installation manual: bootable USB stick for Windows 10 LTSC 1809 Requirements Computer with a Windows 7/8/10 operating system USB flash drive (16GB or more) Rufus utility Format USB flash drive Insert the USB stick to your Computer.
Page 5
Agile S / Agile S NI Installation manual Installation manual: bootable USB stick for Windows 10 LTSC 1809 6. Press “Start” button to begin the process 7. Press “OK” button in the next message to continue the process. 8. When the formatting process is complete, the message "Formatting was successful" (Format Complete) appears.
Agile S / Agile S NI Installation manual Installation manual: bootable USB stick for Windows 10 LTSC 1809 Copy the operating system on the USB stick 1. Run the latest Rufus application “rufus-3.17.exe”. 2. Make the following settings in the "Drive Properties": Device: RDVD (D :) [16GB] ...
Page 7
Agile S / Agile S NI Installation manual Installation manual: bootable USB stick for Windows 10 LTSC 1809 4. In “Status” appears “DONE”. Click on “START” to copy the operating system to the USB stick. 5. The transfer takes about 10-15 minutes.