Other Functions
Selecting the wall paper pattern
There are three patterns to choose from.
1 Press
to display
NEXT
Press
until
NEXT
C.MENU
2 Press
and then press
C.MENU
select the wall paper pattern mode.
3 Press any of the buttons A – C to select the
desired pattern.
Using the AUX source
An IP-BUS-RCA interconnector such as the CD-
RB20 or CD-RB10 (sold separately) lets you
connect this product to auxiliary equipment
featuring RCA output. For more details, refer to
the IP-BUS-RCA interconnector's owner's man-
ual.
.
C.MENU
appears.
to
PTRN
Selecting AUX as the source
1 Press
to select
SOURCE
Press
until
SOURCE
AUX
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on page 82.
Entering the AUX title
The title displayed for the AUX source can be
changed.
1 Press
to select AUX as the source.
SOURCE
Press
until
SOURCE
AUX
2 Press
and then press TTLin to select
FUNC
the AUX title input mode.
Refer to Entering disc titles on page 64, and
perform procedures 3 to 7 in the same way.
Note
• Even if you do not press TTLin you can enter
the title, but you will not be able to change the
character types.
as the source.
AUX
appears.
AUX
appears.
En
Section
12
87