Switching The Auxiliary Setting; Switching The Guide Animation Setting; Switching The Muting/Attenuation Setting; Setting The Guide Select - Pioneer ANH-P9R-BK Operation Manual

Section
Initial Settings
11

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this product.
Turn the auxiliary setting on when using exter-
nal equipment connected to this product.
1 With the source turned off, press and hold
1.
2 Press to select the AUX mode.
AUX
3 Press to turn AUX on.
AUX
appears in the display.
ON
• Press again to turn AUX off.
AUX
Switching the guide animation
setting
Navigation guide animation can be switched on
and off.
1 With the source turned off, press and hold
1.
2 Press
G.ANI
appears in the display.
ON
• Press again to turn the guide animation
G.ANI
off.
Switching the muting/attenua-
tion setting
• This setting controls whether the volume of
the Head Unit is automatically muted during
voice guidance.
• Either muting or attenuation is selectable for
the guide voice of the head unit when a mute
signal has been received from a cell phone
connected to the head unit.
82
En
to turn the guide animation on.
1 With the source turned off, press and hold
1.
2 Press to select the muting/attenu-
MUTE.S
ation mode.
3 Press to select the desired setting.
MUTE.S
Press repeatedly to switch between the
MUTE.S
following settings:
(muting)— (attenuation)—
MUTE ATT
attenuation)

Setting the Guide Select

Car navigation audio (guidance) can be output
from the front speakers.
1 With the source turned OFF, press and
hold 1.
2 Press to select the Guide Select
G.MIX
mode.
3 Push the rotary stick 2 or 3, or press the
multi-function button to select the desired
output setting.
LEFT + RIGHT — LEFT — RIGHT

Setting the FM tuning step

Normally, the FM tuning step is set at 50 kHz
during seek tuning, however, it changes to 100
kHz when the AF or TA function is on.
You can set the FM tuning step to 50 kHz even
when the AF or TA function is on.
1 With the source turned off, press and hold
1.
2 Press and then press FMstep to
NEXT
select the FM tuning step mode.
3 Press the corresponding button to select
the desired tuning step.
(no
NORMAL