Using Radio Text; Displaying The Radio Text; Storing Radio Text; Recalling Preset Radio Text - Pioneer ANH-P9R-BK Operation Manual

Section
RDS
05

Using radio text

This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Notes
• When radio text is received, the "TXT" indica-
tor lights.
• The tuner automatically memorizes the three
latest radio text broadcasts received, replac-
ing text from the least recent reception with
new text when it is received.
• If you do not perform an operation within 30
seconds, the radio text mode is canceled.

Displaying the radio text

1 Press to display "R.TEXT".
NEXT
Press until "R.TEXT" appears.
NEXT
2 Press
R.TEXT
mode.
3 Press 2 or 3 to recall the three latest radio
text broadcasts from the tuner's memory.
Pressing 2 or 3 switches between the four
radio text data displays.
Notes
• Press
BAND/ESC
mode.
• When no radio text is currently being
received, "No text" is displayed.
• If there is no radio text data stored in the
tuner, 2 or 3 does not operate.
54
En
to switch to the radio text
to cancel the radio text

Storing radio text

You can store data from up to six radio text
transmissions under the buttons
.
MEMO6
1 Select the radio text you want to store in
memory.
Refer to Displaying the radio text on this page.
2 Press and hold any of the buttons
until "RT memo" appears to store the
MEMO6
desired radio text.
The radio text is stored in memory under the
selected button.

Recalling preset radio text

1 Press to display "R.TEXT".
NEXT
Press until "R.TEXT" appears.
NEXT
2 Press to switch to the radio text
R.TEXT
mode.
3 Press any of the buttons
to recall the radio text preset under that but-
ton.
–
MEMO1
–
MEMO1
–
MEMO1 MEMO6