Switching And Scrolling The Title - Pioneer ANH-P9R-BK Operation Manual

Section
Built-in CD Player
06
WARNING
Do not use with the front panel left open.
If the front panel is left open, it may result
in injury in the event of an accident.
Notes
• You can select CD as the source by pressing
when a audio disc is loaded in this
SOURCE
product.
• When the front panel is open, multi-function
buttons are not available.
• Do not insert anything other than a CD into
the CD loading slot.
• A CD left partially inserted after ejection may
incur damage or fall out.
• If a CD cannot be inserted fully or playback
fails, make sure the recorded side is down.
Press 0 and check the disc for damage
before reinserting it.
• If the built-in CD player cannot operate prop-
erly, an error message (such as "ERROR-14")
appears on the display. Refer to
Understanding built-in CD player error mes-
sages on page 89.
• You can eject the CD by pressing and holding
0 with opening the front panel when the CD
loading or ejecting cannot operate properly.
• After choosing your destination, press
and you can listen to the guide voice
SOURCE
during navigation guidance.
• When new traffic information arrives,
appears. If desired, check the new informa-
tion.
56
En

Switching and scrolling the title

When playing a CD TEXT disc, you can switch
text display such as artist name and track title.
With text longer than 24 letters, you can scroll to
see the rest of the text.
1 Press to switch the title mode.
TITLE
2 Press the corresponding button to display
the desired title.
Button Operation
TTL1 Displays disc title and track title.
TTL2 Displays disc title and disc artist name.
TTL3 Displays track title and track artist
name.
SCROLL Scrolls the displayed title.
Notes
• If you do not operate the function within about
eight seconds, the display is automatically
returned.
• You cannot use 2 or 3 to select a track in title
mode.
• The titles are displayed up to 24 letters long.
• A CD TEXT disc is a CD featuring recorded text
information such as disc title, artist name and
track title.
• If certain text information is not recorded on a
CD TEXT disc, "No ~" (e.g., "No title") is dis-
played.
• If you have not input disc titles, "No title" is
displayed.