Tuner; Display And Indicators; Basic Operation; Tuner Display And Indicators - Pioneer ANH-P9R-BK Operation Manual

Tuner

Display and indicators

4 2
5
1 Band
2 indicator
AF
3 indicator
LOC
4 Preset number
5 Frequency
6 Stereo indicator
3 6 1

Basic operation

This product's AF function can be switched on
and off. AF should be switched off for normal
tuning operations. (Refer to page 49.)
1 Press to select the tuner.
SOURCE
Press until "Tuner" appears.
SOURCE
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press to select the desired band.
BAND/ESC
Press repeatedly to switch between
BAND/ESC
the following bands:
— — —
FM-1 FM-2 FM-3
4 Press 2 or 3 to tune in to a station.
The frequencies move up or down step by step.
• If you press and hold 2 or 3 for about one
second and release, you can perform seek tun-
ing. Seek tuning lets you skip broadcasting
stations until a broadcast strong enough for
good reception is found.
• If you press and hold 2 or 3, you can skip
broadcasting stations. Seek tuning starts as
soon as you release the button.
Notes
• The stereo indicator "" lights when a stereo
station is selected.
• After choosing your destination, press
and you can listen to the guide voice
SOURCE
during navigation guidance.
• When new traffic information arrives,
appears. If desired, check the new informa-
tion.
MW/LW
En
Section
04
45