Playing Tracks In Random Order; Scanning Cds And Tracks - Pioneer ANH-P9R-BK Operation Manual

Section
Multi-CD Player
07

Playing tracks in random order

Random play lets you play back tracks in ran-
dom order within the repeat range: multi-CD
player repeat and disc repeat.
1 Select the repeat range.
Refer to Repeating play on page 61.
2 Press
FUNC
the random mode.
3 Press to turn random play on.
RDM
The light illuminates. Tracks will play in random
order within the selected repeat range.
• Press again to turn random play off.
RDM
• When the random mode is exited while ran-
dom play is on, "RDM" appears on the basic
display.
Note
• If you turn random play on during one-track
repeat, the repeat range changes to disc
repeat.
62
En
and then press to select
RDM

Scanning CDs and tracks

When you select disc repeat, scan play lets you
hear the first 10 seconds of each track on the
selected CD. When you select multi-CD player
repeat, scan play lets you hear the first 10 sec-
onds of the first track on each CD.
1 Select the repeat range.
Refer to Repeating play on page 61.
2 Press and then press
FUNC
the scan mode.
3 Press to turn scan play on.
SCAN
The light illuminates. The first 10 seconds of
each track of the current disc (or the first track
of each disc) are played.
• When the scan mode is exited while scan play
is on, "SCAN" appears on the basic display.
4 When you find the desired track (or disc),
press to turn scan play off.
SCAN
The light goes off. The track (or disc) will con-
tinue to play.
• If the scan mode is automatically canceled,
select the scan mode again.
Notes
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
• If you turn scan play on during one-track
repeat, the repeat range changes to disc
repeat.
to select
SCAN