Multi-Cd Player; Display And Indicators; 50-Disc Multi-Cd Player; Basic Operation - Pioneer ANH-P9R-BK Operation Manual

Multi-CD Player

Display and indicators

2 3
4 6
1 Source name
2 Disc number
3 Track number
4 Disc title
5 Play time
6 Track title

50-disc multi-CD player

Only those functions described in this manual
are supported for 50-disc multi-CD players.
5 1

Basic operation

This product can control a multi-CD player,
which is sold separately.
1 Press to select the multi-CD
SOURCE
player.
Press until "Multi-CD" appears.
SOURCE
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press 5 or ∞ to select a disc.
A disc number for which there is no disc will be
skipped.
• You can use the buttons
select a disc directly.
4 Press 2 or 3 to select a track.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
• If you press and hold 2 or 3, you can perform
fast forward or reverse.
Notes
• When the multi-CD player is performing the
preparatory operations, "Ready" is displayed.
• If the multi-CD player cannot operate properly,
an error message such as "ERROR-14" is
displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine, "No disc" is displayed.
• After choosing your destination, press
and you can listen to the guide voice
SOURCE
during navigation guidance.
Section
– (or – ) to
1 6 7 12
En
07
59