Tv Tuner; Display And Indicators; Basic Operation; Storing And Recalling Broadcast Stations - Pioneer ANH-P9R-BK Operation Manual

Section

TV Tuner

09
The following explains how to use this
product to control a TV tuner, which is
sold separately. For details of TV tuner-
specific operation/features, see your TV
tuner's manual.
• With this product, you can operate preset
channel list as one additional function.

Display and indicators

2
1 Band
2 Preset number
3 Channel

Basic operation

1 Press
SOURCE
Press until "Television" appears.
SOURCE
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press 2 or 3 to tune in to a station.
• If you press and hold 2 or 3 for about one
second and then release, you can perform seek
tuning.
74
En
1
3
to select the TV tuner.
Storing and recalling broadcast
stations
If you press any of the buttons
you can easily store up to 12 broadcast stations
for later recall.

Storing broadcast stations

1 Press to display "1" – "6" (or "7" –
NEXT
"12").
Press until "1" – "6" (or "7" – "12")
NEXT
appears.
2 When you find a station that you want to
store in memory, press and hold any of the
buttons 1 – 6 (or 7 – 12) until the preset num-
ber stops flashing.
The station is stored in memory under the
selected button.
Notes
• Up to 12 stations can be memorized in one
band.
• This product allows you to store and recall
directly using preset channels 7 –12.

Recalling broadcast stations

1 Press to display "1" – "6" (or "7" –
NEXT
"12".
Press until "1" – "6" (or "7" – "12")
NEXT
appears.
2 Press any of the buttons 1 – 6 (or 7 – 12) to
recall the station preset under that button.
Note
• You can also use 5 or ∞ to recall broadcast
stations memorized under the buttons 1 – 12.
– (or – ),
1 6 7 12