Using Balance Adjustment; Adjusting Equalizer Curve - Pioneer ANH-P9R-BK Operation Manual

Audio Adjustments

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press to select F/B (fader/balance).
AUDIO
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
• "FADER F15" – "FADER R15" is displayed as
the front/rear speaker balance moves from front
to rear.
• "FADER FR00" is the proper setting when only
two speakers are used.
• When the PREOUT setting is
adjust front/rear speaker balance. Refer to
Switching the rear output setting on page 83.
3 Press 2 or 3 to adjust left/right speaker
balance.
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
• "BALANCE L09" – "BALANCE R09" is
displayed as the left/right speaker balance
moves from left to right.

Adjusting equalizer curve

You can adjust the level, the frequency and the
Q factor.
1 Press
2 Press 2 or 3 to select the desired band for
, you cannot
SW
adjustment.
3 Press
Press 5 or ∞ until the desired frequency
appears in the display.
40
200
3.15 k—8 k
4 Press
Each press of 5 or ∞ increases or decreases
the level.
increased or decreased.
5 Press
Press 5 or ∞ until the desired Q factor appears
in the display.
2 N
• If you make adjustments when a curve other
Level (dB)
Center frequency
and then press EQ.
AUDIO
to select the desired frequency.
FREQ
— — — (Hz)
80 100 160
— — — (Hz)
500 1 k 2 k
— —
10 k 12.5 k
to select the level.
LEVEL
– is displayed as the level is
+6 –6
to select the desired Q factor.
Q
— — —
1 N 1 W 2 W
Note
than is selected,
CSTM2
updated.
Q=2W
Q=2N
Frequency (Hz)
(Hz)
curve is
CSTM1
En
Section
10
77