Using Bass Adjustment; Using Treble Adjustment; Using Loudness - Pioneer ANH-P9R-BK Operation Manual

Section
Audio Adjustments
10

Using bass adjustment

You can adjust the cut-off frequency and the
bass level.
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
40 63 100 160
3 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
+6
increased or decreased.

Using treble adjustment

You can adjust the cut-off frequency and the
Treble level.
• In and
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press
AUDIO
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
2.5k 4k 6.3k
3 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level.
+6
increased or decreased.
78
En
and then press .
BASS
(Hz)
– is displayed as the level is
–6
modes, treble adjustment
and then press
TREBLE
(Hz)
10k
– is displayed as the level is
–6

Using loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
AUDIO
the loudness mode.
Loudness level (e.g.,
play.
2 Press
LOUD
LOUDNESS ON
• Press
LOUD
3 Select the desired level with 2/3.
Press 2 or 3 until the desired level appears in
the display.
—
LOW MID
.
and then press
LOUD
) appears in the dis-
MID
to turn the loudness on.
appears in the display.
again to turn loudness off.
—
HIGH
to select