Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer DEH-3850MPH Operation Manual

Section
07

Audio Adjustments

Introduction of audio
adjustments
1 2
1 Audio display
Shows the audio adjustment status.
2 FIE indicator
Shows when the front image enhancer is
turned on.
3 Loudness indicator
Appears in the display when loudness is
turned on.
4 BASS indicator
Shows when the bass boost is in effect.
5 SW indicator
Shows when the subwoofer output is turned
on.
6 CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer
curve adjustment)LOUD (loudness)
SUB.W (subwoofer on/off setting)80 : 0
(subwoofer setting)HPF (high pass filter)
BASS (bass boost)FIE (front image enhan-
cer)SLA (source level adjustment)
# When the subwoofer controller setting is
P/O :FUL, you cannot switch to SUB.W. (Refer to
page 28.)
22
En
3 4 5 6
Black plate (22,1)
# You can select the 80 : 0 only when subwoofer
output is turned on in SUB.W.
# When the rear output setting is R-SP :S/W,
you cannnot select F.I.E. function.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD :F15  FAD :R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 28.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL : 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
<YRD5055-A/U>22