Multi-Cd Player; Playing A Cd; Selecting A Track Directly - Pioneer DEH-P9600MP Operation Manual

Multi-cd/dab control dsp high power cd/mp3/wma player with rds tuner
Hide thumbs Also See for DEH-P9600MP:
Table of Contents

Advertisement

Available languages

Available languages

Section
08

Multi-CD Player

Playing a CD

You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Disc number indicator
Shows the disc currently playing.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1
Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis-
played.
2
Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3
Select a disc you want to listen to with
the 16 buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as 1 for disc 7, until the disc number ap-
pears in the display.
36
En
All manuals and user guides at all-guides.com
1
2
3
# You can also sequentially select a disc by
pressing a/b.
4
To perform fast forward or reverse,
press and hold c or d.
5
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to the multi-CD player
owners manual.
! If there are no discs in the multi-CD player ma-
gazine, No disc is displayed.

Selecting a track directly

When using the remote control, you can select
a track directly by entering the desired track
number.
1
Press DIRECT.
Track number input display appears.
2
Press NUMBER buttons to enter the de-
sired track number.
# You can cancel the input number by pressing
CLEAR.
3
Press DIRECT.
The track of entered number will play.

Advertisement

Chapters

Table of Contents
loading

Table of Contents