Installing A Power Supply - Themis RES-12XR3 Installation Manual

RES-12XR3 Installation Manual - Configuration 7

2.1.7.2 Installing a Power Supply

Perform the following steps to install a power supply:
2-18
1. Insert the replacement power supply into an empty slot with the power LED
at the top (see Figure 2-17 on page 2-17).
2. Push the power supply carefully into its slot until it is firmly seated (a click
will be heard when the locking lever is securely fastened to the chassis).
3. Replace and tighten the two captive screws to hold the power supply locking
lever to the chassis (see Figure 2-17) to secure both power supplies.
Version 1.1
Themis Computer