Power Supply; Removal; Installation; Figure 2-9 The Res-32Xel Power Supply Locking Mechanism - Themis RES-32XEL Installation Manual

Table of Contents

RES-32XEL Installation Guide

2.1.7

Power Supply

Each 460-watt load-sharing (N+1 redundant) power supply can be hot-swapped

while the system is still on and operational.

2-12

1. To remove a power supply, first hook your right index finger into the extrac-

tion handle and pull the locking lever to the right with the right thumb (see

Figure 2-9), freeing the power supply from being held within the chassis.

2. Pull the power supply until it is free of the chassis.

Caution: When pulling the power supply from the chassis, hold it at the bot-

tom to prevent it from falling and damaging the unit.

Locking Lever

Figure 2-9.

The RES-32XEL Power Supply Locking Mechanism

3. Insert the replacement power supply into an empty slot with the extraction

handle facing to the right (see Figure 2-9).

4. Push the power supply carefully into its slot until it is firmly seated (a click

will be heard when the locking lever is securely fastened to the chassis.

Extraction Handle

Themis Computer

Table of Contents