Firmware Version - ACME AE-610 BEAM User Manual

Fixture Time
To select Fixture Time, press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button again. Press and hold the
MENU button about one second or wait for one minute to exit the menu mode.
Lamp Time
To select Lamp Time, press the ENTER button and the display will show the number of working
hours of the lamp. To go back to the functions press the MENU button again. Press and hold the
MENU button about one second or wait for one minute to exit the menu mode.
Lamp On
To select Lamp On, press the ENTER button to show the LAMP ON on the display. Use the
DOWN/UP button to select the On (Lamp on) or Off (Lamp off). Once selected, press the ENTER
button to setup, to go back to the functions without any change press the MENU button again.
Press and hold the MENU button about one second or wait for one minute to exit the menu mode.
Lamp Power On
To select Lamp Power On, press the ENTER button to show the LAMP POWER ON on the display.
Use the DOWN/UP button to select the On (Lamp on when power on) or Off (Lamp off when
power off). Once selected, press the ENTER button to setup, to go back to the functions without
any change press the MENU button again. Press and hold the MENU button about one second or
wait for one minute to exit the menu mode.

Firmware Version

To select Firmware Version, press the ENTER button and the display will show the version of
software of the unit. To go back to the functions press the MENU button again. Press and hold the
MENU button about one second or wait for one minute to exit the menu mode.
Defaults
To select Defaults, press the ENTER button to show the PRO DEFAULTS on the display. Use the
DOWN/UP button to select the Yes (run built-in program to set the fixture to PRO Defaults settings)
or No. Once selected, press the ENTER button to setup, to go back to the functions without any
change press the MENU button again. Press and hold the MENU button about one second or wait
for one minute to exit the menu mode.
9A