Description; Control Panel; How To Set The Unit; Main Function - ACME AE-610 BEAM User Manual

3. Description

3.1 Control Panel

1. Button:
MENU To select the programming functions
DOWN To go forward in the selected functions
UP To go backward in the selected functions
ENTER To confirm the selected functions
2. Microphone: To receive music for sound active;
3. LED:
DMX
SOUND Flashing
4. Function Display: Used to show the various menus and the selected function;
5. Fuse(T5A): Protects the unit from over-voltage or short circuit;
6. Power In/out: Used to connect to supply power.
7. DMX In/out: Water proof cable with 3-pin XLR connectors for DMX 512 operation;

4. How To Set The Unit

4.1 Main Function

Turn on the unit, press the MENU button into menu mode, press the UP and DOWN button until
the required function is shown on the monitor. Select the function by the ENTER button. Use the
UP and DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.
In the event of disconnecting with mains power, press the UP button for one minute to enter into
menu mode. Press MENU button or let the unit idle one minute to exit.
The main functions are shown below:
On DMX input present
Sound activation
5A