Table of Contents
Advertisement
to select the 5CH/20CH. Once select the required mode, press the ENTER button to save or automatically
exit menu mode without any change after one minute. To go back to the functions without any change
press the MENU button.
DMX Last State
Select the DMX Last State (The state when the fixture out of signal), press the ENTER button and the
display will blink. Use the DOWN/UP button to select Blackout (Blackout the output) or Hold (Hold the
last state). Once select the required mode, press the ENTER button to save or automatically exit menu
mode without any change after one minute. To go back to the functions without any change press the
MENU button.
Starting Value
Select the Starting Value, press the ENTER button and the display will blink. Use the DOWN/UP button to
select Red/Green/Blue and set the value of six lasers for Red1-Red6/Green1- Green6/Blue1- Blue from
000 to 125. Once select the required mode, press the ENTER button to save or automatically exit menu
mode without any change after one minute. To go back to the functions without any change press the
MENU button.
White Balance
Select the White Balance, press the ENTER button and the display will blink. Use the DOWN/UP button
to select Red /Green/ Blue/ Red1-Red6/Green1- Green6/Blue1- Blue6 and set the value from 90 to 255.
Once select the required mode, press the ENTER button to save or automatically exit menu mode
without any change after one minute. To go back to the functions without any change press the MENU
button.
Control Direction
Select the Control Direction press the ENTER button and the display will blink. Use the DOWN/UP button
to select Right to Left or Left to Right. Once select the required mode, press the ENTER button to save or
6B
Advertisement
Table of Contents
