Safety Instructions - ACME LS-608 RGB User Manual

1. Safety Instructions

Please read the instructions carefully which includes important
WARNING
information about the installation, operation and maintenance.
 Laser radiation avoids body exposure, especially for eye, it's easy to cause blindness. Please keep the
safe distance at 30 meters from clothing or skin.
 Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
 Unpack and check carefully there is no transportation damage before using the unit.
 It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
 Disconnect main power before replacement or servicing.
 The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are blocked.
 Maximum ambient temperature is Ta: 40 degrees C. DO NOT operate it where the temperature is
higher than this.
 Unit surface temperature may reach up to 85 degrees C. DO NOT touch the housing with bare-hands
during its operation.
 In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
 DO NOT connect any dimmer.
 DO NOT touch any cables during operation as high voltage may cause electric shock.
 To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
 The housing and lenses must be replaced if they are visibly damaged.
2B