Table of Contents
Advertisement
automatically exit menu mode without any change after one minute. To go back to the functions without
any change press the MENU button.
Auto Test
Select the Back Light, press the ENTER button. The fixture will test by itself automatically. Back to the
functions without any change press MENU button again.
Manual Test
Select the Manual Test, press the ENTER button and the display will blink. Use the DOWN/UP button to
select Red /Green/ Blue/ /Dimmer/Effect Red1-Red6/Green1- Green6/Blue1- Blue6 and set the value
from 000 to 255. Once select the required mode, press the ENTER button to save or automatically exit
menu mode without any change after one minute. To go back to the functions without any change press
the MENU button.
Temperature
Select the Temperature, press the ENTER button and the display will show the current running
temperature of the fixture. To go back to the functions press the MENU button again.
Fixture Hours
Select the Fixture Hours, press the ENTER button and the display will show the running time of the
fixture. To go back to the functions press the MENU button.
Software Version
Select the Software Version, press the ENTER button and the display will show the version of software of
the fixture. To go back to the functions press the MENU button again.
7B
Advertisement
Table of Contents
