Technical Specifications; Installation - ACME LS-608 RGB User Manual

2. Technical Specifications

 DMX Control;
 Input Voltage:
 Power Consumption of Laser: 800 mW x 6
 Power Consumption
 IP Rate
 Dimension:
 Weight:

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed
to avoid vibration and slipping while operating and make sure that the structure to which you are
attaching the unit is secure and is able to support a weight of 10 times of the fixtures weight. Always use
a safety cable that can hold 12 times of the weight of the fixture when installing.
The equipment must be installed by professionals and it must be installed in a place where is out of the
reach of people and no one can pass by or under it. The unit must be installed 0 ~ 30 meters from
adjacent surfaces.
AC100V~240V，50/60Hz
105W
IP X4
915 x 225.5 x 249mm
13.8Kgs
3B