Pcie/Pci/Pnp Configuration; The Following Pci Information Will Be Displayed; Pci Latency Timer; Pci-X Latency Timer - Supermicro X10SRG-F User Manual

•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCIe/PCI/PnP Configuration

The following PCI information will be displayed:

•
PCI Bus Driver Version
•
PCI Devices Common Settings:

PCI Latency Timer

Use this feature to set the latency timer for each PCI device installed on a PCI bus.
Select 32 to set the PCI latency to 32. The options are 32, 64, 96, 128, 160, 192,
224 and 248 PCI Bus Clocks.

PCI-X Latency Timer

Use this feature to set the latency timer for each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64. The options are 32, 64, 96, 128, 160, 192,
224 and 248 PCI Bus Clocks.

PERR# Generation

Select Enabled to allow a PCI device to generate a PERR (PCI/PCI-E Parity Error)
number for a PCI bus error event. The options are Enabled and Disabled.

SERR# Generation

Select Enabled to allow a PCI device to generate an SERR (System Error) number
for a PCI bus error event. The options are Enabled and Disabled.

PCI PERR/SERR Support

Use this feature to enable or disable the runtime event for PCI errors. The options
are Disabled and Enabled.

Above 4G Decoding (Available if the system supports 64-bit PCI decoding)

Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled.
4-21
Chapter 4: AMI BIOS