Unit Identification Led (Le1); Onboard Power Led (Le2) - Supermicro X10SRG-F User Manual

Unit Identification LED (LE1)

A rear UID LED indicator (LE1) is located
next to the I/O backplane. This UID Indicator
provides easy identification of a system unit
that may be in need of service.
Note: UID can also be triggered via
IPMI on the motherboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on
our website @ http://www.super-
micro.com.

Onboard Power LED (LE2)

An Onboard Power LED is located
at LE2 on the motherboard. When
LE2 is on, the AC power cable is
connected. Make sure to disconnect
the power cable before removing or
installing any component. See the
layout below for the LED location.
A
LE1
1
JUIDB1
UID-SW
SXB1A
COM1
VGA
COM2
LAN2
BMC
i350
LEDM1
JPL1
JBRSET1
JPG1
USB 4/5
JSTBY1
B
LE2
BT1
SP1
Intel C610
JBT1
X10SRG-F
REV:1.01
DESIGNED IN USA
CPU
2-35
1
LGA2011-3
Color/State OS Status
Blue: On Windows OS
Onboard PWR LED Indicator
LED Status
Color/Status
Off
Grenn: On
A. Unit ID LED
B. Onboard Power LED
4
LAN1
USB 0/1(3.0)
IPMI_LAN
SXB2A
USB 6/7
USB 8/9(3.0)
JITP1
Chapter 2: Installation
UID LED Status
Unit Identified
Definition
System Off
System on