Unit Identification Led - Supermicro X10SDV User Manual

Unit Identification LED

A rear UID LED indicator (LED7) is located
next to the Unit Identifier (UID) switch on the
I/O back panel. The front panel UID LED is
located at pin 7 of the Front Control Panel at
JF1. Connect a cable to pin 7 on JF1 for front
panel UID LED indication. When you press
the UID switch, both rear UID LED and front
panel UID LED Indicators will be turned on.
Press the UID switch again to turn off both
LED Indicators. These UID Indicators provide
easy identification of a system unit that may
be in need of service.
Note: UID can also be triggered via
IPMI on the motherboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on
our website at http://www.supermi-
cro.com.
A
A
C
SRW2
JNVI2C1
SRW1
BMC
AST2400
C
SLOT7
LEDM1
PCI-E 3.0 X16
J21
A
LED3
A C
VGA
LAN1/2
LAN3/4
LED8
C
X10SDV-F
REV: 2.00
DESIGNED IN USA
Intel
D-1500
JBT1
USB 4/5
JF1 I-SGPIO2 I-SGPIO1
JPME1
2-35
Color/State Status
Blue: On
JPL1
i350
BT1
J6
FAN2
JF1:
HDD
PWR OH PWR
NIC2 NIC1
RST X
FF LED LED
ON
Chapter 2: Installation
UID LED
Status
Unit Identified
A. UID LED
USB 0/1(3.0)
IPMI_LAN
COM1
USB 2/3
JPI2C1
PJ1
JPW1
FAN1