Using The [User/Disk] Program Group; Collecting Favorite Sounds Into A [User/Disk] Program Group - Korg Ci-9600 Owner's Manual

Table of Contents

7. Using the [USER/DISK] program group

You can use the [USER/DISK] program group when you wish to rearrange programs

in an order convenient for performance, or when you wish to create a program group

that contains only the programs you use frequently.

You can collect 64 programs into a single group and save them on a ﬂoppy disk. If you

create several such groups and save them on a ﬂoppy disk, you will be able to load and

use them whenever you wish.

MeMO

With the factory settings, data from the included ﬂoppy disk has been loaded.

Here's how to select your favorite programs from the various program groups of the

Ci-9600/Ci-8600, and arrange them in the desired order in the [USER/DISK] program

group.

Press the PROGRAM GROUP [USER/DISK] switch

The contents of the currently-loaded [USER/DISK] program group will be dis-

played.

Select the copy destination program

Press the program name of the copy destination.

The program you select here will be replaced by the program you select in step 5.

When you execute the Write operation, the program you select here will disap-

pear.

Press the "Custom" button

The "Custom Prog" page will appear.

Press the "Copy" button

The "Custom Copy" page will appear.

Select the program that you wish to copy

Press the "Source Prog" cell, and select the program you wish to copy to the pro-

gram that was selected in step 2. Use the same procedure as usual when selecting a

program. (☞p.21)

MeMO

You can also select from a ﬂoppy disk. To select programs from a ﬂoppy disk, use the

"Load 1 Prog" operation explained on the following page.

Table of Contents

Ci-8600