Table of Contents
Advertisement
2. Adjusting the volume of a song
Adjusting the overall volume
Adjusting the volume of individual parts
1
2
3
4
58
You can use the [ACC VOLUME] slider to adjust the entire volume of the automatic
accompaniment and the volume of the keyboard performance. To adjust the overall
volume, use the [MASTER VOLUME] slider.
To adjust the volume of each part and the volume of the keyboard, make settings in the
Mixer screen.
Press the [MIXER] switch
The switch indicator will light, and the "Mixer" page will appear.
Access the "Mixer 2/3" page
Press the [PAGE ®] switch to access the "Mixer 2/3" page.
Select the part whose volume you wish to adjust
Press the cell for the part whose volume you wish to adjust.
Keyboard volume
U1 (Upp1):
The volume of the first sound when [LAYER] or [SPLIT] are on, or the
volume of the keyboard when [LAYER] or [SPLIT] are off
U2 (Upp2):
The volume of the sound layered on Upp1 when [LAYER] is on
L (Low):
The volume of the sound to the left of the split point when [SPLIT] is
on
Accompaniment part volume
Dr (Drum):
This part is set to MIDI channel 10. It will normally be the drum part.
1–9, 11–16:
These parts are set to MIDI channels 1–9 and 11–16 respectively.
Adjust the volume
Use the dial or the [VALUE] switches to adjust the volume. The range is "000"–"127."
Advertisement
Table of Contents
