Table of Contents
Advertisement
Deleting a file
1. Press the [FUNCTION] switch
2. Access the "Func 5/13" page
3. Select the type of file that you wish to delete
Press the appropriate radio button to select the
type of file that you wish to delete.
"Style": a custom style file (.ARR, .STY)
"Set":
a panel setting file (.ARG, .GBL)
"Prog.": a custom program file (.PRG)
"Reg.": registration file (.KBS)
"Rec.":
a recording data file (.BQS)
"SMF": a file that can be played back as a
song (.MID)
4. Select the filename
5. Press the "Delete" button
The file you selected in step 4 will be erased.
86
6. Convenient functions
Adjusting the left/right balance
Here's how to adjust the left/right balance of the
sound.
1. Press the [FUNCTION] switch
2. Access the "Func 2/13" screen
3. Adjust the "Pan"
If you are not using layer or split, or to change the
setting for the first sound of a layer, press "▲" or
"▼" to change the value of the "Upp1" cell.
To change the setting for the second sound of a
layer, use "▲" or "▼" of the "Upp2" cell.
To change the setting for the lower sound of a
split, use "▲" or "▼" of the "Low" cell.
The available range is Off , L15 (left only)–Cnt
(center)–R15 (right only), and Prg (the value
specified by the program).
To return to the previous display
If you press the [EXIT] switch or the [FUNC-
TION] switch, the [FUNCTION] switch indica-
tor will go dark, and you will return to the
previous LCD screen.
Adjusting the display time of a popup screen
1. Press the [FUNCTION] switch
2. Access the "Func 13/13" screen
3. Adjust the display time
Use "Prog/Style" to adjust the time that the
popup screen that appears when you switch the
program or rhythm style will remain visible. Use
"Other Page" to adjust the time that popup
screens for other settings will be displayed.
The available range is 0.1–10 seconds.
To write settings into internal memory
In the "Func 10/13" page, execute "Write."
If you turn off the power without writing, the
previous settings will reappear.
To return to the previous display
If you press the [EXIT] switch or the [FUNC-
TION] switch, the [FUNCTION] switch indica-
tor will go dark, and you will return to the
previous LCD screen.
Advertisement
Table of Contents
