Changing The Program Name - Korg Ci-9600 Owner's Manual

6
Press the "Copy" button
The program will be copied, and you will return to the "Custom Prog" page.
To change the program name
If you wish to change the name of the program, press the "Rename" button before
you write, and change the name. ☞"Changing the program name"
7
Write the program
If this is the program you want, press the "Write" button to write it.
If you decide not to write
Press the "Cancel" button without writing, the copied contents will be discarded,
and the data will revert to the original program. You will return to the main screen.
8
Change other programs as well
Repeat steps 1–7 to collect the desired programs in the [USER/DISK] program
group.
9
Save to floppy disk
Save the [USER/DISK] program group you created to a floppy disk. ☞p.34 "Saving
to a floppy disk"
Never remove the floppy disk or turn off the power while data is being writ-
ten.
MeMO The sound programs you collected here will remain even if the power is turned off,
but we recommend that you save them on a floppy disk.

Changing the program name

You can modify the name of a program that you "Write" to the [USER/DISK] program
group. Press the "Rename" button and modify the filename.
1
Access the "Rename" button
Press the "Rename" button, and the "Rename" page will appear.
2
Select a character
Use the dial or the [VALUE] switches to select the first characters.
3
Finalize the first character
Press the "Set" button to finalize the first character.
4
Select the next character
Select characters as in steps 2 and 3 to assign the desired file name.
A file name of up to 16 characters can be assigned.
To make a correction
Use the "o," "k" button to move the cursor to the character that you wish to cor-
rect.
If you wish to delete the character, press the "Delete" button; the character at the
cursor location will be deleted. If you wish to insert a character, press the "Insert"
button; the selected character will be inserted at the cursor location.
33