Selecting Different Sounds For The Lower And Upper Ranges Of The Keyboard (The Split Function) - Korg Ci-9600 Owner's Manual

5
Selecting different sounds for the lower and upper ranges of the
keyboard (the Split function)
1
2
3
24
Return to the main screen
If the [DISPLAY HOLD] switch is on, press the [EXIT] switch to return to the main
screen.
The names of the "Upp2" and "Upp1" programs will be displayed in the main
screen.
In this screen you can also you can use the "▼ Upp2 ▲" and "▼ Upp1 ▲" buttons
to select different programs.
To cancel the Layer function
Press the [LAYER] switch to make the [LAYER] switch indicator turn off.
You can select and play different programs for the lower and upper ranges of the key-
board. This is called the Split function.
Press the [SPLIT] switch
The [SPLIT] switch indicator will light, and the "Split" page will appear.
Select each sound
Use the "A" cell to select the "Upp1" (upper range), and the "B" cell to select the
"Low" (lower range). ☞p.21 "1. Selecting sounds"
Low
Adjust the volume balance of the two sounds
Use the dial or the [VALUE] switches to adjust the value of the "Vol" (volume) cell.
The volume can be adjusted from 0 (minimum) – 127 (maximum).
B A
Upp1
Split point